E: info@deltapanels.com    W: www.deltapanels.com
Head Office: 731 Boundary Road, Richlands, Qld 4077  |  P: +61 7 3271 2170  
Sydney Depot: 11 The Old Northern Road, Narellan, NSW 2567  |  P: +61 2 4611 7712
ABN: 11 147 861 292
   Page: 4 of 126
Version Date: 2025-12-29
1. INTRODUCTION
This manual should be used as a general guide only and is intended to be used 
in conjunction with the project’s installation drawings. The installation drawings 
should identify the applicable roof conditions, specify the components to be used 
and the required arrangements of the components. Specific building design and 
construction conditions may require variations from the information in this guide.
Delta Panels does not guarantee and is not liable for the quality of the installation. 
Delta Panels is not responsible for anything that may be attributable to improper 
installation, the negligence of other parties or from materials supplied by a third 
party.
Project Manager as used throughout this manual refers to the project’s owner and/
or his representatives, such as the project’s architect, design engineer and general 
contractor. 
These parties are responsible for determining the following.
•	
Selection of a competent Installer who is qualified and experienced in the proper 
installation of insulated building panels and their related flashing requirements.
•	
That the Installer has reviewed and understands the project’s installation 
drawings and this guide prior to installation.
•	
The Panels and related components are installed in accordance with the 
project’s installation drawings and the applicable sections of this guide.
•	
The Panels are suitable for the purposes intended.
•	
The Project’s structural framing is properly designed and in satisfactory 
condition to accept the installation and design loads imposed by the panels.
•	
That the Panels and associated components are installed in compliance with 
the applicable building codes, engineering certifications, service conditions 
and good engineering and construction practices.

View this content as a flipbook by clicking here.