E: info@deltapanels.com    W: www.deltapanels.com
Head Office: 731 Boundary Road, Richlands, Qld 4077  |  P: +61 7 3271 2170  
Sydney Depot: 11 The Old Northern Road, Narellan, NSW 2567  |  P: +61 02 4611 7712
ABN: 11 147 861 292
   Page: 4 of 76
Version Date: 2025-12-30
2  . INTRODUCTION
This manual should be used as a general guide only and is intended to be used 
in conjunction with the project’s installation drawings. The installation drawings 
should identify the applicable site conditions, specify the components to be 
used and the required arrangements of the components. Specific building 
design and construction conditions may require variations from the information 
in this guide.
Delta Panels does not guarantee and is not liable for the quality of the 
installation. Delta Panels is not responsible for anything that may be attributable 
to improper installation, the negligence of other parties or from materials 
supplied by a third party.
‘Owner’ as used throughout this manual refers to the projects owner and/or his 
representatives, such as the project’s architect, design engineer and general 
contractor. 
These parties are responsible for determining the following.
•	
Selection of a competent Installer who is qualified and experienced in the 
proper installation of insulated building panels and their related flashing 
requirements.
•	
That the Installer has reviewed and understands the project’s installation 
drawings and this guide prior to installation.
•	
The Panels and related components are installed in accordance with the 
project’s installation drawings and the applicable sections of this guide.
•	
The Panels are suitable for the purposes intended.
•	
The Project’s structural framing is properly designed and in satisfactory 
condition to accept the installation and design loads imposed by the 
panels.
•	
That the Panels and associated components are installed in compliance 
with the applicable building codes, engineering certifications, service 
conditions and good engineering and construction practices.

View this content as a flipbook by clicking here.