E: info@deltapanels.com W: www.deltapanels.com Head Office: 731 Boundary Road, Richlands, Qld 4077 | P: +61 7 3271 2170 Sydney Depot: 11 The Old Northern Road, Narellan, NSW 2567 | P: +61 02 4611 7712 ABN: 11 147 861 292 Page: 11 of 76 Version Date: 2025-12-30 7. DELIVERY RECEIVALS & STORAGE • For longer packs the panel packs will need to be craned off the delivery vehicle • If the panels exceed 8 meters a spreader bar is required to ensure that the slings do not cause any damage to the packs. • The packs of panels should be stored correctly on the site in an area that will eliminate any chance of damage occurring to the packs • The Delivery Docket will clearly state the quantity, description and type of panels delivered along with any associated components. It is the owners responsibility to cross check the delivery docket with the actual goods received at the time the goods are received. Onsite Storage • The panels should not be unpacked until it is time to install them, in the meantime they should be stored in an area away from traffic to eliminate the possibility of damage. • Panels exposed to direct sunlight can result in Thermal Bowing which can prevent proper engagement during installation. Store the panels in a shaded area or leave the panels fully packaged until required for installation. • All protective packaging when removed should be disposed of correctly • Be aware that there is protective film on the steel surfaces of the panels if this film is left exposed to sunlight for a period of time it may become difficult to remove. It is advised to keep the original packaging shroud over the top of the panel packs to eliminate sun exposure • Keep panels a safe distance from other on site trades that are welding, cutting or painting.
View this content as a flipbook by clicking here.