Delta Panels Pty Ltd - ABN: 11 147 861 292
P: +61 07 3271 2170    
E: info@deltapanels.com   
W: www.deltapanels.com    
Head Office: 731 Boundary Road, Richlands, Qld 4077
Sydney Depot: 11 The Northern Road, Narellan, NSW. 2567    
Page 5 of 8 
Version Date: 2025-10-15
STEP 1 - DETERMINE THE WIRING LAYOUT
RECOMMENDED INSTALLATION STEPS
INTO AN INSULATED STRUCTURAL PANEL
STEP 2 - ENSURE POWER IS DISCONNECTED
•	
Ensure  that there is no live power in the work area, especially where the recess holes are going to be cut.
•	
Make sure that the power supply is switched off to the GPO which will power the Led Driver.
•	
The downlights must be installed in the middle third of the width of the panel.
•	
Downlights should only be installed no closer than every second panel.
•	
The roof must be non trafficable (designed with only the 1.1kN maintenance load).
•	
The downlights must be no closer that 2000mm along the span of the panel.

View this content as a flipbook by clicking here.