E: info@deltapanels.com      Head Office: 731 Boundary Road, Richlands, Qld 4077    +61 7 3271 2170
 W: www.deltapanels.com     Sydney Depot:  11 The Old Northern Road, Narellan, NSW 2567   +61 02 4611 7712
ABN: 11 147 861 292
Version Date: 
08.05.2023
5
ENGINEERING NOTES
BEAM TYPES
Manufactured from high tensile steel, DeltaBeamTM is engineered and tested to comply with AS 1397-2011. 
Major components are made from strong high tensile steel, while the fixings and brackets are galvanised 
for a long, useable life.
STEEL COMPONENTS
All Steel structural components of the Delta Panels™ Awnings, Patios & Carports Kits systems are in 
accordance with the following Australian Standards:
Delta Insulated Panel Top Skin	            AS 1397-2011
Delta Insulated Panel Bottom Skin 	
AS 1397-2011
Delta Beam™	 	
	
	
AS 1397-2011
Posts ( Square Hollow Sections)	
AS 1163-2016
The following minimum grades are required for theses steel components:
-   All Posts to be Grade C350LO
-   All Plates are Grade 250 U.N.O
-   All External Steelwork to be Hot Dip Galvanised including Fixings 
    Note: Duragal is not an adequate substitute for hot dip galvanising
-   All Bolts are Grade 4.6/S & Welds SP, class 4mm continuous fillet weld U.N.O.
FIXINGS
All fixing components of the Delta Panels™ Awnings, Patios & Carports Kits systems are in accordance 
with these Australian Standards
Bolts shall be grade 4.6 or greater	
AS 1110.1-2015
Fixing Screws shall be class 3		
AS 3566-2002
DELTABEAMTM SPECIFICATIONS
Height
100
150
200
250
300
Base Metal 
Thickness
1.0mm
1.2mm
1.2mm
1.6mm
1.6mm
Yield Strength
550MPa
550MPa
550MPa
550MPa
550MPa
Width
65mm
65mm
65mm
65mm
65mm

View this content as a flipbook by clicking here.