Certificate number: CM40365-I01-R01 This certificate is only valid when reproduced in its entirety. Page 7 of 8 Construction in bushfire prone areas The TPC cores have been assessed against AS 1530.8.1 (TPC Core) can be used up to and including BAL-29, results shown below. TPC Core for Panel thickness from 100-250mm (tested to AS 1530.8.1): This report details the methods of construction, the test conditions and the results obtained when the specific element of construction described herein was tested in accordance with the test method of AS 1530.8.1: • For the purpose of building regulations in Australia, the test specimen achieved a Bushfire Attack Level (BAL) of AA29. Source: CSIRO, Report FSZ 2373 dated 9/06/2023 & BRANZ, Report FAR 2489 Issue 3 dated 23/02/2021. Energy Efficiency DeltaCool™-EPS-FR walls (insulated sandwich panels) Thickness (mm) Material R 50/90 values (m².K/W) Total R values (m².K/W) Winter (15°C) Rating (23°C) Summer (30°C) Winter (15°C) Rating (23°C) Summer (30°C) 50 1.20 1.17 1.14 1.36 1.33 1.30 75 1.78 1.73 1.69 1.94 1.89 1.85 100 2.35 2.28 2.23 2.51 2.44 2.39 150 3.44 3.35 3.27 3.60 3.51 3.43 200 4.49 4.37 4.27 4.65 4.53 4.43 Declared R of insulated sandwich panels - DeltaCool™-TPC walls Nominal Thickness (mm) Insul Effective Thickness (mm) Material R 50/90 values (m².K/W) Total R values (m².K/W) Winter (15°C) Rating (23°C) Summer (30°C) Winter (15°C) Summer (30°C) 50 49 1.25 1.20 1.20 1.40 1.35 75 74 1.9 1.85 1.80 2.05 1.95 100 99 2.55 2.45 2.40 2.70 2.55 150 149 3.85 3.75 3.65 4.00 3.80 200 199 5.15 5.00 4.90 5.30 5.05 Notes: The requirements of J3D6(1) of Volume 1 of the BCA and Part 13.2.5 (5) of the ABCB Housing Provisions do not apply to walls constructed using insulated sandwich panels. Source: James Fricker Report No. i548c dated 2/06/2023. & James Fricker Report No. i548c dated 19/09/2023. A4 Manufacturer and manufacturing plant(s) Delta Panels Pty Ltd 731 Boundary Road, Richlands, QLD 4077, Australia A5 Installation requirements Installation of the DeltaCool wall panels must be in accordance with the Handling & Installation Manual - Walls V23-11-20. A6 Other relevant technical data No other relevant technical data.
View this content as a flipbook by clicking here.