WARRANTY - Roof Products
abraded or damaged in any way, or coated with an 
incompatible material;
c)	
Sheltered or areas unwashed by rain exposure 
must be washed down on a regular six monthly 
basis;
d)	 Installed pitch of the roof is equal to or greater than 
1 degree above the horizontal (DeltaSingle™) 
or 2 degrees above the horizontal (DeltaTrim™/ 
DeltaTrimTrim™), or 3 degrees above the 
horizontal (DeltaOrb™/DeltaCorroCorro™/
DeltaTrimCorro™); and
e)	
All fasteners used for fixing the product to be in 
accordance with the Company’s recommendations 
and comply with Australian Standard AS 3566: 
Class 4 where applicable.
11)	 Nothing in this Warranty will extend the benefit 
of any warranty of the manufacturer of the steel 
beyond the period of the Warranty provided by the 
manufacturer. The period of twenty (20) years referred 
to in the opening clause of this Warranty refers to any 
defects in the DeltaTrim™/DeltaSingle™/DeltaOrb™/
DeltaCorroCorro™/DeltaTrimTrim™/DeltaTrimCorro™ 
panels as a consequence of the company’s 
manufacturing process. Please note, for example, if 
the manufacturer of the steel only warrants their paint 
finish for ten (10) years then the benefit of the warranty 
for the paint finish of the DeltaTrim™/DeltaSingle™/
DeltaOrb™/DeltaCorroCorro™/DeltaTrimTrim™/
DeltaTrimCorro™ panels is directly linked to that of the 
steel manufacturer, in that case ten (10) years.
12)	 When the insulation core material of DeltaTrim™/
DeltaOrb™/DeltaCorroCorro™/DeltaTrimTrim™/
DeltaTrimCorro™ panels is Expanded Polystyrene 
- Fire Retardant Grade (EPS-FR). EPS-FR is a 
thermoplastic and as such is subject to changes in 
its structural properties when subjected to high levels 
of sustained heat. On extremely hot days with no 
cooling wind, dark colours have been known to reach 
these extreme temperatures. To ensure that these 
levels of heat are not encountered, we recommend 
that the DeltaTrim™/DeltaOrb™/DeltaCorroCorro™/
DeltaTrimTrim™/DeltaTrimCorro™ panels not be 
subjected to dry heat loads in excess of 78.0ºC (see 
clause 9, subclause j here in this warranty). The 
manufacturer of the steel recommends the following 
colours, subject to conditions of use, will maintain a 
temperature under 78.0ºC dry heat. 
These are the only colours that we acknowledge as 
being covered under this Warranty. If the colour utilised 
is not listed in the recommended colours list, unless 
written confirmation is obtained from the Company, it is 
assumed not to be covered.
•	 Off White / Surfmist ®
•	 Hamptons White
•	 Smooth Cream / Classic Cream ™
•	 Merino / Paperbark ®
•	 Gull Grey / Shale Grey ™
•	 Birch / Dune ®
•	 Mist Green / Pale Eucalypt™
•	 Zinc
•	 Armour Grey / Windspray ®
The following colours are available in DeltaTrim™/
DeltaOrb™/DeltaCorroCorro™/DeltaTrimTrim™/
DeltaTrimCorro™ panels and are still covered by the 
twenty (20) year manufacturing defect warranty, but will 
be void from any claims under this Warranty that are as 
a direct result of sustained temperatures above 78.0ºC 
dry heat.exclusion, restrictions or modification of such 
conditions or warranty.
•	 Iron Grey / Ironstone ®
•	 Jasmin Brown / Jasper ®
•	 Slate Grey / Woodland Grey ®
•	 Mountain Blue / Deep Ocean
•	 Caulfield Green / Cottage Green ®
•	 Heritage Red / Manor Red ®
•	 Wallaroo / Wallaby ®
•	 Basal / Basalt ®
•	 Monolith / Monument ®
•	 Night Sky / Ebony ®
When the insulation core material used are either 
Thermosetting Phenolic Composite (TPC) or Mineral 
Wool (MW) all of the conditions of our stated Warranty 
are fully covered.
13)	 Roll-formed metal sheeting as utilised in DeltaTrim™ 
Insulated Panels may exhibit waviness, commonly 
referred to as “oil-canning.” The degree of oil-canning will 
vary depending on factors such as the panel’s length, 
colour and exposure to sunlight. Oil-canning pertains 
to aesthetics oonly and has no adverse effect on the 
structural performance of the panels. Delta Panels is not 
responsible for oil-canning or aesthetics. Oil-canning 
shall not be grounds to withhold payment or reject panels.
14)	 This Warranty is given in lieu of all other considerations 
or warranties expressed or implied except to the extent 
that any statute applicable to this contract prevents the 
exclusion, restrictions or modification of such conditions 
or warranty.
15)	 The proper law of this Warranty shall be the law 
applying to the State of Queensland.
16)	 For the purpose of this Warranty the Purchaser refers to 
that person who has duly completed the details below 
and no other person.
® Colour names are registered trademarks of Bluescope Steel Limited
™ Colour names are trademarks of Bluescope Steel Limited
     Purchaser
     Agent
Name: _______________________________________
Address: 
________________________________
_________________________________________
Date of Purchase: ________ / _______ / _______
Name: _______________________________________
Date of Installation Works: ______ / ______ / ______
Signature: ____________________
Delta Panels Pty Ltd - ABN: 11 147 861 292
E: info@deltapanels.com   
W: www.deltapanels.com    
Head Office: 731 Boundary Road, Richlands, Qld 4077    P: +61 7 3271 2170    
Sydney Depot: 11 The Old Northern Road, Narellan, NSW 2567   P: +61 2 4611 7712      
Version Date: 2025-05-16
CM40309
CM40330
CM40345
CM40346
CM40365

View this content as a flipbook by clicking here.