Conditions of Warranty
WARRANTY - Wall Products
10) In accordance with the Warranty extended to the
Company by the manufacture of the steel component
of the DeltaCool™ panels, the Company only extends
to the purchaser the benefit of the warranty and
guarantees it receives from the manufacturer to the
extent it is capable of doing so at law and if;
a) Installation is greater than one kilometre from
marine or industrial environments;
b) The paint finish as supplied must not be scratched,
abraded or damaged in any way, or coated with
an incompatible material;
c) Sheltered or areas unwashed by rain exposure must
be washed down on a regular six monthly basis;
d) All fasteners used for fixing the product to be in
accordance with the Company’s recommendations
and comply with Australian Standard AS 3566:
Class 4 where applicable
11) Nothing in this Warranty will extend the benefit of
any warranty of the manufacturer of the steel beyond
the period of the Warranty provided by the manufacturer.
The period of ten (10) years referred to in the opening
clause of this Warranty refers to any defects in the
DeltaCool™ panels as a consequence of the
company’s manufacturing process. Please note, for
example, if the manufacturer of the steel only warrants
their paint finish for ten (10) years then the benefit
of the warranty for the paint finish of the DeltaCool™
panels is directly linked to that of the steel manufacturer,
in that case ten (10) years.
12) When the insulation core material of DeltaCool™
panels is expanded polystyrene (EPS). EPS is a
thermoplastic and as such is subject to changes in
its structural properties when subjected to high levels
of sustained heat. On extremely hot days with no
cooling wind, dark colours have been known to reach
these extreme temperatures. To ensure that these
levels of heat are not encountered, we recommend
that the DeltaCool™ panels not be subjected to
dry heat loads in excess of 78.0ºC (see clause 9,
subclause j herein this warranty). The manufacturer
of the steel recommends the following colours, subject
to conditions of use, will maintain a temperature under
78.0ºC dry heat. These are the only colours that we
acknowledge as being covered under this Warranty.
If the colour utilised is not listed in the recommended
colours list, unless written confirmation is obtained
from the Company, it is assumed not to be covered.
• Thredbo White®
• Off White / SurfmIst®
• Smooth Cream / Classic Cream™
• Gull Grey / Shale Grey™
• Merino / Paperbark®
• Mist Green / Pale Eucalypt™
The following colours are available in DeltaCool™
panels and are still covered by the ten (10) year
manufacturing defect warranty, but will be void from
any claims under this Warranty that are as a direct
result of sustained temperatures above 78.0ºC dry
heat.
• Night Sky / Ebony™
When the insulation core material used are either Thermosetting
Phenolic Composite (TPC) or Mineral Wool (MW) all of
the conditions of our stated Warranty are fully covered.
13) This Warranty is given in lieu of all other considerations
or warranties expressed or implied except to the
extent that any statute applicable to this contract
prevents the exclusion, restrictions or modification
of such conditions or warranty.
14) The proper law of this Warranty shall be the law applying
to the State of Queensland.
15) For the purpose of this Warranty the Purchaser refers
to that person who has duly completed the details
below and no other person.
® Colour names are registered trademarks of Bluescope Steel Limited
™ Colour names are trademarks of Bluescope Steel Limited
Delta Panels Pty Ltd - ABN: 11 147 861 292
E: info@deltapanels.com
W: www.deltapanels.com
Head Office: 731 Boundary Road, Richlands, Qld 4077 P: +61 7 3271 2170
Sydney Depot: 11 The Old Northern Road, Narellan, NSW 2567 P: +61 2 4611 7712
Version Date: 2025-05-16
Delta Panels Pty Ltd - ABN: 11 147 861 292
E: info@deltapanels.com
W: www.deltapanels.com
Head Office: 731 Boundary Road, Richlands, Qld 4077 P: +61 7 3271 2170
Sydney Depot: 11 The Old Northern Road, Narellan, NSW 2567 P: +61 2 4611 7712
Version Date: 2025-05-16
Purchaser
Agent
Name: _______________________________________
Address:
________________________________
_________________________________________
Date of Purchase: ________ / _______ / _______
Name: _______________________________________
Date of Installation Works: ______ / ______ / ______
Signature: ____________________
CM40309
CM40330
CM40345
CM40346
CM40365
View this content as a flipbook by clicking here.