Glen Gugliotti- CMI 
 
Don Grehan – Unrestricted Building Certifier 
Date of issue:  
29/01/2026 
 
 
Date of expiry:  
11/05/2028 
Certificate number: CM40345-I02-R01 
This certificate is only valid when reproduced in its entirety. 
Page 1 of 5 
 
 
Certification Body: 
ABN: 81 663 250 815 
JAS-ANZ Accreditation 
No. Z4450210AK 
PO Box 273, 
Palmwoods Qld 4555 
Australia 
P: +61 7 5445 2199 
www.cmicert.com.au  
office@cmicert.com.au  
 
Certificate Holder: 
 
Delta Panels Pty Ltd 
ABN: 11 147 861 292 
731 Boundary Road, 
Richlands, QLD, 4077 
Australia  
Ph: 07 3271 2170 
www.deltapanels.com.au 
 
Certificate number: CM40345 Rev1 
THIS IS TO CERTIFY THAT 
DeltaFireX™ 
Type and/or use of product: 
Insulated roof panels with a Mineral Wool core. 
Description of product:  
Delta FireX™ roof panels incorporates the non-combustible DeltaTrim-MW & DeltaOrb-MW panels. The 
panels are available in a 75mm, 100mm, 125mm or 150mm thick and 1000mm wide panel in various 
lengths.  Refer A2 for details.  
COMPLIES WITH THE FOLLOWING BCA PROVISIONS AND STATE OR TERRITORY VARIATION(S) 
BCA 2022 (Amdt. 2) 
 
Volume One 
Volume Two 
Performance Requirement(s): 
Not Applicable 
Not Applicable 
Deemed-to-Satisfy Provision(s): C2D10(6)(g) 
Non-combustible building elements 
H3D2(g) 
Non-combustible materials 
 
C2D11(1)(i) 
Fire hazard properties – Group number classification. 
Limited to the DeltaTrim-MW Panel Only 
H6D2 
Energy efficiency – Must be used in conjunction with other 
building elements to achieve a Total R Value. 
 
J4D4 
Energy efficiency – Must be used in conjunction with 
other building elements to achieve a Total R Value. 
 
 
State or territory variation(s):  
Not Applicable 
H6D2(VIC) 
SUBJECT TO THE FOLLOWING LIMITATIONS AND CONDITIONS AND THE PRODUCT TECHNICAL DATA IN APPENDIX A AND EVALUATION STATEMENTS IN APPENDIX B 
Limitations and conditions: 
1. 
Compliance of DeltaFireX™ Panel with NCC Vol. 2 H3D2(g) is as a non-combustible bonded laminated material. 
2. 
Construction shall be in strict accordance with the details is A5. 
3. 
The structural support members are designed and engineered separately as per project requirements by building designers and engineers 
and consideration of the requirements of C2D15 Fixing of bonded laminated cladding panels. 
4. 
When used as an open carport the design needs to consider the requirements of Part 9.2.8 of the ABCB Housing Provisions with the 
exception of 9.2.8.(c), (d) & (f)(i), to the satisfaction of the appropriate authority. 
5. 
The use of the certified product/system is subject to these Limitations and Conditions and must be read in conjunction with the Scope of 
Certification below. 
Building classification/s: 
Class 1,2,3,4,5,6,7,8,9 &10 
 
 
 

View this content as a flipbook by clicking here.