Delta Panels Pty Ltd - ABN: 11 147 861 292 
E: info@deltapanels.com           Head Office: 731 Boundary Road, Richlands, Qld 4077    P: +61 07 3271 2170     
W: www.deltapanels.com          Sydney Depot: 11 The Old Northern Road, Narellan, NSW 2567  P: +61 02 4611 7712   
- MINERAL WOOL PANELS 
 
 
SAFETY DATA SHEET 
DELTA PANELS MINERAL WOOL PANEL (MW)  
- DeltaCoolTM, DeltaSecretFixTM, DeltaTrimTM, DeltaOrbTM, DeltaCorroCorroTM & DeltaDualCoreTM 
 
8. EXPOSURE CONTROLS/PERSONAL PROTECTION 
Control Parameters 
May be regarded as nuisance dusts 
Recommended to follow the National Occupational Exposure Standard (NEW) ASCC 
general guide to keep all occupational exposure to dust and other atmospheric 
contaminants to as low a level as is workably practicable. 
 
Biological Limits 
No biological limits allocated 
Engineering Controls Work practices should minimize the release of, and exposure to, fibers and/or dust. 
Avoid Inhalation, use in well ventilated areas 
 
 
 
If sanding, drilling or cutting use appropriate extraction ventilation 
 
Ventilation 
 
During most applications no special ventilation required 
If in a very dusty work environment or a confined working space then local exhaust 
ventilation should be provided if the dust level exceeds 2 mg/m3 TWA{4} of 
inspirable non-hazardous nuisance dust 
When heated to 200°C for the first time, release of binder components and binder 
decomposition products can occur which, in high concentrations, may irritate the 
eyes and respiratory system. There are no recorded incidents of respiratory 
sensitization from released gases  
 
 
 
 
 
 
 
PPE 
ye protection - Use dust resistant goggles conforming to AZ/NZ 1336 when sanding, 
drilling, or cutting 
 
 
 
 
 
Skin Protection - Loose comfortable clothing should be worn 
Avoid direct contact with skin by wearing long sleeve shirts, long trousers, caps and 
standard duty gloves conforming to AS 2161. 
 
 
 
Respiratory Protection - Class P1, P2 or N95  (Particulate) respirator are appropriate 
when sanding, drilling, or cutting 
 
Personal Hygiene – Washing facilities should be available on site to wash the skin 
and to treat any dust in the eyes 
 
 
 
 
Smoking – It’s highly recommended that all storage and work areas are deemed 
non-smoking zones  
 
 
 
Page 3 of 7 
 
 
 
 
 
 
 
 
 
         
Version 2025-09-23 
 

View this content as a flipbook by clicking here.