Delta Panels Pty Ltd - ABN: 11 147 861 292 P: +61 07 3271 2170 E: info@deltapanels.com W: www.deltapanels.com Head Office: 731 Boundary Road, Richlands, Qld 4077 Sydney Depot: 11 The Northern Road, Narellan, NSW. 2567 Page 1 of 8 Version Date: 2025-10-15 • To reduce the risk of death, personal injury or property damage from fire, electric shock, falling components and cuts and abrasions please read all warnings and instructions included with and on the fixture box and attached product labels. • Before installing, servicing, or performing any maintenance upon these products please follow these general precautions. • As the LED components are all low voltage they do not require a qualified licensed electrician to install them. However a duly qualified licensed electrician will be required to install the GPO outlet into which the 3-point- plug that the LED Driver will be connected to. • All wiring procedures to comply with Australian Wiring Rules AS/NZ3000 • Any maintenance should be performed by persons familiar with the LED light system’s constructions. Regular maintenance is recommended. • Regular Cleaning – It will be necessary to occasionally clean the outside of the lens. The frequency of cleaning will depend on the ambient dirt level based on the dustiness of the surrounding environment. A warm solution using a mild non-abrasive household detergent should be used. Then rinsed with clean water and wiped dry. • These instructions do not purport to cover all details or to provide every possible contingency concerning, installation, operations and maintenance. Should any further information be required please contact Delta Panels Pty Ltd at info@deltapanels.com IMPORTANT SAFETY INSTRUCTIONS LED DOWNLIGHT INSTALLATION READ AND FOLLOW ALL SAFETY INSTRUCTIONS. SAVE THESE INSTRUCTIONS AND DELIVER THEM TO THE OWNER AFTER THE INSTALLATION IS FULLY COMPLETED ENGINEER’S CERTIFICATION