Steel Skin Details
Top Skin
0.42mm / G550 AZ150
Bottom Skin
0.55mm / G300 Z275
Max. Skin Temperature
78oC Dry Heat
Core Material Details
SL Grade Polystyrene - Fire Retardant Grade
Thermal Conductivity
AS 1366.2/ASTM C 518
Average 0.042 W/mK @ 23℃
Adhesive
Thermosetting two-part adhesive
Core Density
13.5kg/m3
Panel Weight (kgs/m2)
based on 0.6mm steel
skins
50mm Panel
10.58
75mm Panel
10.94
100mm Panel
11.30
125mm Panel
11.66
150mm Panel
12.02
175mm Panel
12.38
200mm Panel
12.72
External Roof
R Value (m2.K/W)
AS/NZS 4859 Parts 1 &
2:2018
Thickness
Winter
(15oC)
Summer
(23oC)
50mm Panel
1.38
1.36
75mm Panel
1.90
1.85
100mm Panel
2.52
2.43
125mm Panel
3.13
3.02
150mm Panel
3.69
3.56
175mm Panel
4.31
4.15
200mm Panel
4.88
4.68
Certificate of Conformity
CodeMark Australia Certificate -
CM40309 & CM40436
Length Tolerance (mm)
5mm +/-
Sheet Coverage (mm)
1000mm 5mm +/-
Length (mm)
Cut to Length Min of 1800mm
Thickness (mm)
50, 75, 100, 125, 150, 175, 200
Minimum Roof Pitch
2o
Flatness
Standards
0.42mm
0.55mm
Surface deformations can be
apparent to the naked eye
when observed in certain
lighting conditions
DeltaTrim-EPS-FR is an Insulated Roof Panel System,
comprising of two pre-painted, roll-formed steel skins, with a
fire retardant grade expanded polystyrene insulating core.
The top profile offers striking looks with all of the benefits of
modern insulated panel technologies while the bottom skin
has a roll-formed tongue and groove joining edge.
CodeMark
CodeMark Australia Certificate CM40309 certifies
that DeltaTrim-EPS-FR panels complies with the
stated performance provisions of the BCA.
CodeMark Australia Certificate CM40346 Class
10a Awning and Patio Roof System incorporating
DeltaTrim-MW and DeltaTrim-EPS-FR panels
certifies compliance with the stated performance
provisions of the BCA.
Please refer to the certificates, as displayed on ourweb page,
for the exact details of the compliance.
Colour Range - Warranty
Expanded Polystyrene Fire-Retardant Grade (EPS-FR) is a
thermoplastic that when exposed to high levels of sustained
heat is subject to changes in its structural properties. On
extremely hot days with no cooling wind, dark colours have
been recorded as reaching extreme temperatures. The
manufacturer of the steel recommends the following colours,
subject to conditions of use, will maintain a temperature under
78.0ºC dry heat (see clause 9, sub-clause j of our product
Warranty). Please refer to Clause 12 of the Warranty – Roof
Products for full details.
• Off White / Surfmist ® • Hamptons White
• Gull Grey / Shale Grey ™ • Zinc
• Merino / Paperbark ® • Birch / Dune ®
• Mist Green / Paperbark ® • Armour Grey / Windspray
• Smooth Cream / Classic Cream ™
To maintain Warranty cover with dark colours it is therefore
recommended that a Thermosetting Phenolic Composite
(TPC) or Mineral Wool (MW) core be used for all colours not
listed above.
® Colour names are registered trademarks of
Bluescope Steel Limited
™ Colour names are trademarks of Bluescope
Steel Limited
Detail A
* Conduit receiver track optional addition
Detail B
-EPS-FR
-EPS-FR
Recommendations
• Patios & Pergolas
• Carports
• Portable Buildings
• Home Extensions
• Commercial Buildings
• Residential Buildings
Profiles Available (Underside Skin)
• Smooth & Elegance
*
Due to the nature of the manufacturing process the actual dimensions
may vary. Please refer to the stated acceptable tolerances allowances.
Delta Panels Pty Ltd
ABN: 11 147 861 292
Version Date: 2026-07-01
E: info@deltapanels.com
W: www.deltapanels.com
Head Office: 731 Boundary Road, Richlands, QLD 4077 +61 7 3271 2170
Sydney Depot: 11 The Old Northern Road, Narellan, NSW 2567 +61 2 4611 7712
Sunshine Coast Office: Unit 10, 1 Focal Avenue, Coolum Beach, QLD 4573 +61 1300 200 004
View this content as a flipbook by clicking here.